| Material: | Epoxy Resin |
|---|---|
| Type: | Central Bench, Wall Bench etc |
| Usage: | Hospital, School, Company, Research Institute |
| Color: | White,Green,Black,Gray |
| Customized: | Customized |
| Condition: | New |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
10+ years of manufacturing and exporting experience
Model: JH-ERSize:
| 2450mm (L) x 1530mm (W) x 16mm (Thickness) |
| 2450mm (L) x 1530mm (W) x 19mm (Thickness) |
| 2450mm (L) x 1530mm (W) x 25mm (Thickness) |
We can also make the size based on customer's requirement.
Colour:
The regular colour is black, gray and dark green.
We can make make special colour required by customers.
Advantages of epoxy resin worktop:
1. High temperature resistance:
The epoxy resin worktop will not cause bubble and crack when touching with high temperature in laboratory. It's
suitable to be put into fume hoods with flaming electric stove for long time. The maximum temperature it can
withstand is 600ºC.
2. Super ability on chemical resistance within 24 days.
The material is inertia kind and it's with super ability for most of corrosive chemical reagent.
3. Moisture resistance absolutely
It doesn't contain any paper ingredients. It's suitable to be used in medicine and biology laboratory specially
because it can control the growing for bacteria effectively such as SARS.
4. Safe and reliable:
It doesn't container any asbestine ingredients. It will not set free poisonous gas to influence the health of operator
because it's not flammable and electric.
5. Durable
Our worktop is with combined body which will not dropping layer, expanding and cracking. The products can be
repaired can recovered when the surface is scratched.
6. High cost performance
The performance of our epoxy resin worktop are almost same as imported products, but it's with low cost
compared with imported products.
7. Nice appearance
Smooth surface, low reflection of light and easy to be cleaned.
8. Colour
The main colour is black, gray and white. We can make any colour you specify if your quantity can reach our
requirement.
Lively project pictures:
SGS test report:
Processing information:
1. Cutting the epoxy resin worktop as per its required size with diamond knife head of solid stone cutting machine
along with the water spraying system.
2. The edges with shape of curve or chamfer milled by the diamond knife head of deflasher. Also knife head of
corundum is ok available, but it's lifetime is much shorter than the diamond knife head.
3. Polishing the cutting edge with 80, 120, 220 sand paper one by one., scrubbing the polished mark of cutting
edge with much oil.
4. Polishing the worktop with 3M clean cloth and mineral oil or white oil, then scrubbing the worktop with dry cloth
at last.
Site processing:
At site, pls process the worktop as per actual status. We suggest to use the φ100mm diameter diamond knife of
portable saw and water spraying apparatus to make cutting. Also knife head of corundum is also available too, but
t's also with short lifetime.
Storage:
The epoxy resin worktop should be placed flat, it can't be used as scaffold or casual station. The surface needs
nough protection to avoid being damaged.
Installation:
The worktop should keep tight with the cabinet connecting on horizontally.
Necessary tools:
Epoxy resin gule
80, 120, 220 sand paper
3M clean cloth
Mineral oil or white oil
Naphtha or solvent
MASKING TAPE
Clean cotton cloth
Small wood club
Clamp
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}