Our fume hoods(lab equipment) has been tested by SGS and got approval, it
ensures the safety features of our products.
Dimensions(W× L× D): 1200/1500/1800X850X2350mm
1.one whole piece of 5mm thick tempered safety glass sashes in PP frame, able to
sliding laterally in the frame and vertically with the frame.
2. Frame balanced from elevation and sides so as it can be stopped at any position by
pulling up or down.
3. PP grab handle along the glass edge which is chemical resistance.
Exterior Structure: 1.2 mm thick coldrolled steel folded, welded, polished, acid cleaned,
phosphoresced, and coated with electrostatic, corrosion resistant. And oven dried spray
Interior Claddings: 5 mm thick compact panels on the side with air flow guides on top to
protect the wall and facilitate air discharge. Modular construction
That can be easily disassembled for cleaning and reassembled. Acids, Alkalis, moisture
and high temperature resistant.
Working table: 19mm epoxy resin workop with 25mm edge which is continuous on all four
sides of the worktop.
Lighting: 30 Watt antisepsis daylight lamp fitted in gas insulated housing to provide not
less than 400 LUX of light flux on the working table.
Socket: Four sets of 220 volt/ 10 AMP multi-functional electric socket outlets with water
1. Yellow brass, epoxy resin coated water control valve and cock.
2. Yellow brass, epoxy coated gas control valve and cock. The gas valve is with safety
function to avoid air leakage, it will not be unintentionally turned on unless you press it.
LCD control panel which is capable of controlling ON/OFF of fume hood, lamp and fan.
Shutdown time can be set in advance. We can furnish control panel imported from France
which can show face velocity,
make alarm etc.
1. 3 or 4 double walled doors made of 1.2 mm thick cold-rolled steel and spray painted
as specified above.
2. Stainless steel handles and S.S hydraulic hinges.
3. PP United Cup, resistant to acids, alkali and organic impregnations.
Face velocity: It's 0.4-0.6m/s when we open the sash at 24''. (when the sash is fully
|Size(mm)||Air Volume(m3/h)||Differential Pressure(Pa)||Noise dB|
1. We can add polypropylene storage cabinet in the under cabinet to store strong
2. We can furnish duct and fan if it's required by customers.
3. We can furnish custom-built fume hood based on customer's requirement.We offer our customer with a variety of integrated service covering technical
consulting, building of whole ventilation system,HVAC, clean room and central
gas supply system etc in addition to furnish products to our customers. We are
committed to helping our customers to set up safer, more comfortable labs with