Epoxy Resin Worktop, Lab Worktop
|Min. Order (Square Meters)||FOB Price|
|1+||US $125 / Piece|
Product name: epoxy resin worktop, lab worktop
2480mm (L) x 1590mm (W) x 15mm (Thickness)
2480mm (L) x 1590mm (W) x 19mm (Thickness)
2480mm (L) x 1590mm (W) x 25mm (Thickness)
We can also make the size based on customer's requirement.
The regular colour is black, gray and dark green.
We can make make special colour required by customers.
1. High temperature resistance:
The epoxy resin worktop will not cause bubble and crack when touching with high temperature in laboratory. It's suitable to be put into fume hoods with flaming electric stove for long time.
2. Super ability on chemical resistance within 24 days.
The material is inertia kind and it's with super ability for most of corrosive chemical reagent.
3. Moisture resistance absolutely
It doesn't contain any paper ingredients. It's suitable to be used in medicine and biology laboratory specially because it can control the growing for bacteria effectively such as SARS.
4. Safe and reliable:
It doesn't container any asbestine ingredients. It will not set free poisonous gas to influence the health of operator because it's not flammable and electric.
Our worktop is with combined body which will not dropping layer, expanding and cracking. The products can be repaired can recovered when the surface is scratched.
6. High cost performance
The performance of our worktop are almost same as imported products, but it's with low cost compared with imported products.
7. Nice appearance
Smooth surface, low reflection of light and easy to be cleaned
The main colour is black, gray and dark green. We can make any colour you specify if your quantity can reach our requirement.
1. Cutting the epoxy resin worktop as per its required size with diamond knife head of solid stone cutting machine along with the water spraying system.
2. The edges with shape of curve or chamfer milled by the diamond knife head of deflasher. Also knife head of corundum is ok available, but it's lifetime is much shorter than the diamond knife head.
3. Polishing t he cutting edge with 80, 120, 220 sand paper one by one., scrubbing the polished mark of cutting edge with much oil.
4. Polishing the worktop with 3M clean cloth and mineral oil or white oil, then scrubbing the worktop with dry cloth at last.
At site, pls process the worktop as per actual status. We suggest to use the φ100mm diameter diamond knife of portable saw and water spraying apparatus to make cutting. Also knife head of corundum is also available too, but It's also with short lifetime.
The epoxy resin worktop should be placed flat, it can't be used as scaffold or casual station. The surface needs enough protection to avoid being damaged.
The worktop should keep tight with the cabinet connecting on horizontally.
Epoxy resin gule
80, 120, 220 sand paper
3M clean cloth
Mineral oil or white oil
Naphtha or solvent
Clean cotton cloth
Small wood club